How to Perform a Factory Reset on the LG Fortune 2 LM-X210CM
If you are having troubles with your LG Fortune 2 or you want to clear all your data, you can do a factory reset. This process wipes out everything from your phone, including your personal data. Consequently, you should backup all your important files before you try this method. However, there are other ways to get your data back.
To perform a full wipe, you must first enter recovery mode by going to the system settings. This menu will vary depending on your particular model, so make sure to find it in the notification center. Once you have found the menu, go to Settings and System. You will then need to tap on “Wipe all Data”. Once you’ve done this, you’ll be prompted to enter your PIN, which is important to remember. If you are unable, you will need to repeat the initial setup.
To flash a custom recovery, you can also use the Fastboot mode on the LG Fortune 2. First, connect the device with your computer using a USB cable. While connecting the device, press and hold the Volume Down button, and then release the button. After connecting the device to your PC, you can enter the command below. Make sure you have USB Debugging turned on on your computer and ADB drivers installed on the device. Once you’ve finished the command, your phone should now boot into the Fastboot mode.
You can also reset your LG Fortune 2 hard-resetting it. The recovery mode method is a great option if you don’t have password. Just make sure to turn the phone off first, and then hold the power button and volume down keys at the same time. Hold these keys for a few seconds. After this, you’ll see the LG logo on your screen.
Once you’ve reached this screen, the recovery mode on your LG Fortune 2 LM-X210CM will be enabled. You can choose between Soft reset or Factory data reset from there. You can reset your phone to factory settings without losing any of your personal information such as passwords and data. In addition, it will also allow you to remove any forgotten unlock pattern.
After you’ve completed holding the volume and power keys, your LG Fortune 2 will reboot and restore its factory state. This process will also optimize the pre-installed applications. The next time your LG Fortune 2 is having problems, it’s time to enter the recovery mode. This will almost guarantee that you can fix your problem.
Sometimes, your phone might get stuck in a boot loop. In these cases, you will need to force restart your device. This requires a brute force approach and hardware keys. To do this, you need to know the combination keys for your specific model. The combination keys will depend on your phone, so it’s important to be aware of the combination keys before you try this method.