It is possible to shock a swimming-pool at least twice a day. But what exactly is shock? The chlorine in pool water attaches to particles and leaves behind chemical compounds called chloramines, which can irritate skin and eyes. Shock removes these compounds, which raise the chlorine level back to the proper range of three parts per million. Swimming pools should not be shocked during the day because the sun can quickly burn off some of the shock.
There are many reasons you might need to shock your pool. First, your water is likely to be too hard. High calcium levels can cause calcium buildup and damage pool equipment. If you add too much shock to the water, it can cause the water to turn green overnight. If that happens, you probably gave too much shock. You might also overshock the pool if you add a new chemical.
Calcium hypochlorite is another reason for cloudy water. The shock is not as strong as the chemical used to treat water. It’s also important to check your filter to make sure that it’s not clogged. If it’s working properly, a filter should not be clogged, which will result in a cloudy pool. A good rule of thumb is to wait a day or two between shocks.
The shock dosage for a pool is typically one pound per ten thousand gallons of water. The correct amount depends on your particular problem. Sometimes a double or triple dose is needed. This treatment will kill bacteria spores that can cause infection. The shock will also remove chloramines, which are leftover chlorine from the total chlorine example. You could cause damage to your pool equipment if you shock it too often.
To shock a pool twice, you can combine two pounds of Coral Seas Green-to-Clean algaecide and one pound shock. To avoid algae growth, you may want to shock the pool twice. Just make sure that you follow the instructions and that the shock is compatible with your algaecide treatment. If you haven’t read the instructions on your package, you can use a compatible algaecide instead.
When is it best to shock your swimming pool? Most pool owners recommend shocking their pool once every week. However, you can shock a pool twice a week if the chlorine levels have dropped to less than two parts per million. In warmer months, you should shock the water twice a week and once every other week in the winter. Your swimming pool should be sprayed at least once per month. The chlorine levels should drop to one part per thousand. If you’re planning to shock it twice a week, you should shock it before it becomes cloudy or green.
A shock treatment is most effective at raising the pH of a pool by increasing alkalinity. You can use the Pool Calculator app to check your pH levels. The app can also measure CYA and chemical toughness. Once you have determined the pH level, the app will allow you to place the shock treatment in the chlorineinator or floater. A pool shock works best between pH levels 7.2 and 7.4 for two days.
0